Hunter Ceiling Fan Troubleshooting- Page 6 of 8

How to Balance a Hunter Ceiling Fan

July 15, 2023 by admin Leave a Comment

Hunter ceiling fans are famous for their quality made, and reliability in the market these days. However, even the best ceiling fan may show wobbly blades. It means that the balance of your fan is out. If the fan left in this way, the result can be damaging to the fan. In addition, it is also annoying. It is necessary to repair the issue whenever you see your fan starting to wobble. It will give boost to the air efficiency and the life of the fan will also be longer.

Step 1. Inspect the screws that fix the blades to the blade holders. To avoid wobbling, you need to ensure that the blades are tight in their mountings.

Step 2. Use a damp rag to wipe all the fan blades. When you check for dirt and get rid of it, the fan will be balanced. After removing the dirt or dust from the blades, inspect if the fan is still wobbling.

Step 3. To measure the length from the tip of each blade, you can use a measuring tape, to the ceiling. The measurement of all the blades from the tip of the blade to the ceiling should be similar. If there is a change in the measurement, means any are under or over from others, it means that your blades might be bent slightly up or down at the blade holder. You will have to get a balancing kit if your fan is still wobbling now.

Step 4. Get a fan balancing kit and bring it home. A plastic clip-on weight must be there and multiple metal weights. Locate the middle point of the blade. Take the measurement of the blade and divide the length or span by two. It is the middle. Attach the clip-on weight at the middle point. Switch on the fan. If the wobbling becomes worse, move on to the next blade until the wobble stops. While doing that, if the wobble stops or gets reduced, it means that you have found the unbalanced blade.

Step 5. To go up and down the blade that is not balanced, use the clip-on weight. When you find that the wobble stops, you will get the origin of the issue. Get rid of the plastic weight and attach a metal stick-on weight. The problem is fixed. This is how you can balance your Hunter fan blades. After that, keep the weights in the store as you may need them in the future as another blade can get unbalanced. If your blades are getting unbalanced on a regular basis, you need to check the installation to make sure that it is installed properly.

You can use the weights when another blade gets unbalanced someday so keep it in a safe place. Older fans are more likely to become unbalanced. If you are facing the unbalanced issue frequently, it means there is a problem with the installation, inspect it to make sure the fan is properly installed.

How to Oil a Hunter Ceiling Fan

July 4, 2023 by admin Leave a Comment

The Hunter Original® fans have become the apple of the eyes of the house owners from the very beginning. Hunter Original fan came into existence in 1906, designed for durability and equipped with cast iron materials and a motor that functions with the help of an oil bath lubrication. While other ceiling fans from hunter do not need oiling, Hunter original is the exception due to its unique motor system causes the main bearings to stay lubricated to operate quietly all the time.

The system has been working for over 135 years. Having said that, adding and replacing the oil in the Original ceiling fan by Hunter is necessary. Here’s an easy guide on how to oil a Hunter ceiling fan.

How to Oil a Hunter Ceiling Fan During Installation

Your fan will be shipped without oil in the motor, so you will have to add oil before you start using it.

You need to locate a tube of Hunter high-grade SAE 10 non-detergent oil packaged in the hardware bag. It is imperative that you use Hunter’s oil because the wrong oil can damage the fan.

Things Needed to Oil the Hunter Original Ceiling Fan

Hunter oil for model
Step ladder
Screwdriver
Scissors for cutting the tip on the tube of oil
Pipe cleaner
Hunter Fan product manual

Oiling the Model #51123

Open the oil cap and cut the tip off from the end of the tube.
The next step is to lift the cap of the oil hole to the oil reservoir located at the top of the unit.
Now, put the tube into the oil hole and squeeze the tube gently to empty the oil into the reservoir of the fan.

after filling the reservoir, the next thing is to check the oil level immediately to make sure it’s filled properly (follow the instructions in this guide on how to check your fan’s oil level).
After filling the reservoir, replace cap

TIP: To prevent overflowing during filling, it is ideal to add a third of the oil from the tube at a time. Wait for 30 seconds between each third so the oil gets settled in the fan. You need to ensure that you add all the oil in the tube to the fan.

How do you Lubricate a Hunter Ceiling Fan When Moving its Location

If you need to move your Hunter original fan, you have to remove the existing oil from the fan to avoid spilling it. Take and utilize the original hanging system in your new space but if it requires replacement, you need to get a relocation kit of Hunter for that.

After completing the installation once again, follow the above steps to refill the oil in the Anniversary edition or original fan.

How to Check the Oil Level in Your Hunter Original Fan

To maintain the best performance of the unit, Hunter’s experts suggest you check the oil level in your unit every 1-5 years, even if the fan is working fine.

If your Hunter ceiling fan is making a noise, it could be happening due to several reasons, one of them is needing oil.

Follow these simple steps to check the oil level:

Firstly, switch off the power to the fan
Bend a ½-inch hook on one end of a basic pipe cleaner
Dip the hook into the oil reservoir
Get rid of the pipe cleaner and examine that if the oil has touched the end of the hook

If the pipe cleaner contains oil on it, that shows the reservoir is full.

If the pipe cleaner does not have oil on the end, add more oil until you repeat Step 4 and check and see the oil on the pipe cleaner.

Where to Get Oil for Your Hunter Original Fan

After getting solution for how to oil a hunter original fan the next thing is where to find it.

Hunter’s 1 oz. tube of Hunter high-grade SAE 10 non-detergent oil is especially available to give the unique oil bath lubrication system of the Hunter Original® ceiling fans for a lifetime of noiseless function. If you will use the wrong oil, it can damage the fan, so make sure you use our recommended oil designed for the Hunter original fan to make its rotation smooth. We have added the link to the oil above to purchase.

Maintaining the oil level in your Hunter Original fan does not need a lot of effort or time and the maintenance of the oil can give long-lasting, quality performance that you can rely on to get the comfort you are looking for.

How To Install A Hunter Ceiling Fan With Remote

July 4, 2023 by admin Leave a Comment

Modern architecture will be compatible with modern technology, is not it?

Just remember that Hunter has remote control ceiling fans that can complement your modern-age living area with light too. But, how to install a hunter ceiling fan with remote? How to install a hunter ceiling fan with light?

Well, it might seem difficult to you but the installation of a ceiling fan is a straightforward task.

Firstly, you have to take down your existing fixture first. Then, install the ceiling fan bracket and wire it. After doing so, install the components including canopy, blades and a light kit if it is available.

This guide will help you to understand and you will be able to install hunter ceiling fan with remote so that you can do it the right way.

Let’s get started!

A Guide to Install a Hunter Ceiling Fan with Remote

As we already mentioned that hunter ceiling fans installation is not very complicated as it seems. Your task is to follow the steps given in the owner’s manual with the required tools.

Tools Required

Here’s a list of tools and supplies that will need to install the hunter ceiling fan with remote to do the proper installation and safely.

Ladder
Screwdriver
Plier
Wire stripper
Wire tester
Electric drill machine
9/64’’ drill bit

Once you have gathered all the tools, you are ready to begin the process. Here is a step-by-step guide you need to follow:

Ready to Get Started

Before you begin the installation of the fan, you need to ensure that the distance of the fan is safe from other walls and floors. The blade tips of the unit should be at least 30-inch clearance from the nearest barriers.

Switch off the power from the main circuit breaker that supplies power to the room as well as the wall switch for your safety.

If you are not new in that house, it is more likely that there is already an existing fan installed there. In this case, you need to take it down first. Disconnect the nuts and wires that are mounted to the ceiling.

Install the Ceiling Bracket

To make sure that the ceiling fan is safely affixed to the ceiling, you should use the Hunter bracket kit that is packed with hunter ceiling fan remote control.

You have to install the bracket to a box that is affixed between the joints or put it within a brace that is connected between the joints.

How to install a ceiling bracket:

Reveal the pre-installed screws from the motor adaptor.
Tighten the downrod and comes through the wires of the fan through the down rod.
Cut the extra length of the wires (8-inch from the down rod), now, strip 3/8 of an inch of the wires from the top.
After that, tight the screws to the motor adaptor again. Now, attach the canopy that passes the wires and downrod.
Lastly, place the down rod ball into the correct slot within the ceiling bracket.

Wiring the Ceiling Fan

Now, begin with wiring the Hunter ceiling fan with remote control. Put the bare metal ends of the two wires together to fix with a wire nut first. After that, tighten the nuts by rotating them clockwise.

Most Hunter fans are packed with preinstalled remote receivers that already have receivers installed. Advanced engineering can make your task simple.

If you have a single wall switch, you need to follow these steps:

Link the ground wire (white in color) from the ceiling to the ground wire of the unit.
Link the black wire (ungrounded) that is revealed from the ceiling to the black wire of the fan.
Link the green, green/yellow stripe, and bare copper wire with the wire nut which is coming from the ceiling, downrod, and ceiling bracket.
The blue wire is not needed that come out from the fan for single switch wiring.

If you have a dual wall switch, you have to link the other ungrounded wire to the blue wire from the unit using a wire nut. The rest of the wiring will remain the same.

Now, if your Hunter fan does not come with a remote receiver pre-installed, you’ll have to wire it with a separate remote receiver. Here’s how you will do it.

Connect the yellow wire of the receiver to the black wire of the unit.
Connect the blue wire from the fan to the blue wire of the receiver.
Link the black wire of the receiver to the black wire of the ceiling.
Now, connect the grounded wire which is white in color from the ceiling to both the white wire of the receiver and fan.
Lastly, connect the three wires getting out from the ceiling, downrod, and ceiling bracket.

Install Canopy or Motor Housing

You will need a canopy installation if the unit you are going to use needs a downrod. To install the canopy, you need to place the wires into the junction box first. After that, lift the canopy into the required place to insert and tight the canopy screws with the help of a screwdriver.

Alternatively, to install a low profile Hunter Ceiling Fan, you’ll have to install the motor housing. Tuck the wire nuts together into the junction box for the sake of installation.

Then, pick up the motor housing and check the alignment of the screw holes with the holes of the ceiling bracket. Now, insert the screws and tight the motor housing screws.

Install Fan Blades

After completing the installation of the canopy or motor housing, the next task is to attach blades. Hunter fans provide all the needed instruments to fix the blades.

First of all, you need to insert the grommets into the holes of every blade. Then, use the screws to secure the blades to their blade irons

After that, use the screws to place the blade arms to the motor and tighten their connection.

Install Light

Your Hunter ceiling fan remote control may include lighting in it. in this case, you have to install the lighting kit too.

But before you get started, you need to check if the fan you have contains a quick connect feature. It can be checked from the switch housing of that fan.

Fans with the Quick Connect feature are designed with a specific locking mechanism that is present in the switch housing. The rings are also surrounding the housing.

Install Remote Control

Hunter fans are replete with remote control features while handheld remote and wall controls arrive pre-installed with the unit.

A wall control remote will be installed at the wall switch. The process will make everyone remember that where to change the speed of the fan.

Alternatively, you can use handheld Universal fan remote control to control fan speeds levels right from the sofa, bed or anywhere in the room.

Some of the Hunter units remote are available with a feature to control the speed levels from the smartphone with the help of SIMPLEconnect app.

We hope that you have learned how you install Hunter ceiling fan with remote successfully. The duration of this process can take around 1-1.5 hours depending on your expertise.

However, if you aren’t confident enough to install the fan, it is highly recommended to call your nearest professional electrician to do the job.

Final Words

Keeping in view the advancement of technology, we want to control everything by remaining in our comfort zone by using the easiest ways, fingers. Hunter fans are the ideal choice when it comes to keeping yourself up to date with technology and aesthetics. So, we hope that this guide will enable you to learn how to install a hunter ceiling fan with remote properly.

Hunter Ceiling Fan Not Working – How to Fix

July 3, 2023 by admin Leave a Comment

In the ceiling fans industry, Hunter ceiling fan is a reputed brand. Their models are reliable because they are of great quality. However, like all other electrical appliances and equipment, Hunter ceiling fans may cause several problems.

So, what is the reason why a Hunter ceiling fan not working?

The problem can be with the circuitry including a tripped breaker, faulty wiring, broken switch and so on. Or it can stop working if the remote is not working. And lastly, the problem could be with the fan itself.

This guide will allow you to find out the cause of the malfunctioning Hunter ceiling fan and how to fix the problem.

What Can Cause a Hunter Ceiling Fan to Malfunction?

There are a lot of causes that can cause a Hunter ceiling fan to stop working, including circuit problems to a malfunctioning fan. We will go through some of these possibilities now.

Circuit Problems:

1. Faulty Circuitry:

A faulty wiring is a common problem that can cause a Hunter ceiling not to work.

During the installation process, if the wiring was not secured, the wires could move away from the connections or terminals, resulting in the ceiling fan to stop working.

2. Tripped Breaker:

You need to ensure that the power breaker is not tripped. Firstly, find out which circuit is begin used to power the ceiling fan.

After that, go through the main panel, and observe the breaker for that circuit has been tripped or not.

A GFCI outlet on the circuit can also stop the fan from functioning and it could be the culprit.

If you are using GFCI outlets on the same circuit, observe to ensure that they are not tripped.

3. Broken or Damaged Switch:

The broken or damaged switch could also prevent the flow of electricity. So, it is your duty to ensure that switch is functioning as it needs to be.

In many instances, the main cause could be a low-quality or cheap switch behind the issues of electrical appliances.

Remote Issues:

1. Empty Batteries:

Drained or empty batteries could be the culprit behind a Hunter fan remote not working. So, you have to ensure that the batteries of your Hunter remote are good enough to perform the remote function.

2. Unpaired Remote:

Some models of Hunter have to be paired to the remote to function properly.

So, it is necessary to ensure that the remote and the fan are synced with one another.

The company has different types of remotes that come with the fan and need different settings to pair it. You need to follow the right instructions to pair the fan.

To do that, here is our helpful guide on how to program a Hunter ceiling fan remote.

3. Defective Receiver:

At times, the cause can be the receiver box that is within the fan. But before you start with the receiver, the first thing is to ensure the ceiling fan is not connected to any power supply.

Ceiling Fan Malfunctions:

1. Physical Barriers to Fan Blades:

You need to find out if there is any sort of object or item that is obstructing the blades of the fan and stopping it from rotating.

If that is the case, remove it. Sometimes something can get stuck between the blades and the fan’s body, and prevent it from spinning.

2. Motor Issues:

At times, the motor of a ceiling fan also burns out and restricts it from functioning completely. In this case, you have to get a replacement for it.

It is very hard to retrieve burnt-out motors. But it hardly happens and the last resort is to troubleshoot your fan.

Before you finalize anything, you need to ensure properly there are no other problems.

How to Troubleshoot a Hunter Ceiling Fan?

There are some simple steps in order to fix a Hunter ceiling fan. But the fixes are different as per the problem. Let’s see some of the troubleshooting.

If the problem is with the circuitry, here are the instructions you need to follow to proceed with the solutions.

Steps to Troubleshoot Problems Related to the Circuit:

The first thing is to ensure the switch is switched on and the power breaker is not tripped.
Use a voltage tester, a non-contact voltage tester is suggested. And inspect that the voltage is present in the positive terminal of the Hunter fan.
If there is no voltage, it could be the issue of the circuit.
Make sure the switch has a voltage in it.
If the circuit breaker is not tripped and the switch is not getting voltage, there is a problem with the wiring or with the switch.
Make sure the wiring is working.
If so, change the switch.
Otherwise, it will be essential to rewire the circuit.

But if there is no problem with the circuits and they are working properly and you are unable to locate an issue, you need to check the remote control.

Follow these steps in order to troubleshoot a Hunter ceiling fan remote.

Fixing the Hunter Fan Remote:

Ensure that the batteries are working to operate it.
Change the batteries if required.
Check if the Hunter fan is paired with the controller. As every remote and fan comes with a different method of pairing, it is recommended that you go through the manual of your specific fan.
If they are not synced, pair them. And it will fix the problems related to a Hunter remote.

Lastly, we are going to get rid of the problems regarding the fan itself. But before you start troubleshooting your hunter fan, you need to check that the remote and the circuitry are working appropriately.

Troubleshooting a Hunter Ceiling Fan:

hunter fan wiring diagram — Hunter Ceiling Fan Wiring Diagram

The first thing is to ensure that the motor reversing switch is not stopping midway.
Switch off the current from the circuit breaker.
Use a voltage tester to ensure that there is no voltage.
To get access to the wires, loosen the canopy.
Different units come with different wiring diagrams. These diagrams are available in the user manual of that specific model. An example of this kind of diagram is in the above picture.
The next thing is to ensure that the wire connections of your ceiling fan are similar to the diagram in the manual.
If they are not, rewire them to fix them.
If the problem is still present, the motor could be the reason. Although it hardly happens, if that is the case, you need to replace it.

If your Hunter ceiling fan stops working, there are some solutions that can be used to fix it. Hopefully, you will be able to fix your ceiling fan with the above methods and it will start functioning again properly.

Related Read: Hunter Ceiling Fan Wiring

Conclusion

We have tried our best to list the possible reasons that cause a Hunter ceiling fan not working. And we have also given the step by step guide on how to fix those problems. However, if you are unable to find the problem, do not be reluctant to call a professional. As the underlying issues are hard to find out and you will not be able to determine them without contacting a professional.

Hunter Fan is Wobbling – How to Fix

February 15, 2023 by admin Leave a Comment

Do you want to know why does your hunter ceiling fan wobble or shakes? There are several reasons why is it happening. Here is a list of causes that can result in a wobbly fan.

Before you get started, do you know that your Hunter fan needs maintenance from time to time? Whether you are using Hunter or any other model, maintenance is essential and you should do occasional cleaning.

Whether you accept it or not, dust and dirt can accumulate on the top of your fan. Although the dirt can be in a small amount, eventually if you are avoiding maintenance for a long time, the dirt and dust will lead to several issues including unbalanced blades. Unbalanced blades are the main reason for fan wobbling – so the best bet is to clean the top of your fan blades after a while. It will also affect the lifespan of the blades as well as the fan.

dirty ceiling fan — Here is an example of a dirty fan and you need to avoid it.

It seems like the fan is caked in dirt. There is no doubt in saying that it needs a good cleaning. You should not avoid your fan that long so it gets dirty and gross.

These are the reasons that can cause your Hunter fan to wobble:

Loose screws
Lack of maintenance (as stated above) – an example of dirty blades with dust/dirt buildup on top is also shown
Dusty or warped fan blades – caused by the dirt

You can also try using these troubleshooting steps to find out where the wobble issue may be happening!

As we have stated earlier, the first step you need to take is to clean the blades and clean any dirt you find on the components. You need to make sure that nothing is stopping the blades to turn and run.
The next step is to ensure that if there are any loose screws. If you find any screws which are moveable with your fingers, it is a problem that needs to be fixed. You have to make sure they are snug properly. This looseness can cause wobbling or can make the fan noisy.
The next thing is to ensure that the box that your Hunter fan is attached to is properly secured. It should be rated to support the weight of your unit. you will have to inspect that this box (also known as an outlet box) is connected to proper support like a fan beam. The box should not be flush mounted (directly attached to the ceiling), it will not support the fan in a proper way.