A wall switch is one of the ways that can be used to switch on your ceiling fan. However, in some occasions, you may observe that your Hunter fan wall switch is not working. Having said that, if you have a Hunter fan, there are more likely that you are facing problems with the wall switch.
That is the reason we are going to have a look at a few methods through which you can fix the Hunter fan wall switch not working. You will be able to do it easily. So, without further ado, let’s start it.
How to Fix Hunter Fan Wall Switch Not Working?
1. Loose Wiring
Loose wiring is one of the most common reasons behind the problems including the ceiling fan is working weird. So, if you are having any problems like it, it is highly suggested that you check the wires first. Just remember that the inspection of the wiring will be done on both the wiring installed on your ceiling fan and the switch wiring.
However, before you begin with the fixing, we highly recommend that you switch off the power from the circuit breaker. It will be safe for you when it comes to dealing with wires.
After opening the wall switch, ensure that every screw inside contains a black wire covering it. Similarly, you will be able to see the black wire that is linked to your ceiling fan. if the connection on this wire is not firmly tight (loose), you will have issues when switching on the fan from the switch.
2. Check Power Source
Another thing to consider other than loose wiring is to check the power source. It is more likely that your switch is not getting enough power to switch on your ceiling fan. Our recommendation is, to begin with, the control panel and ensure you do not have a flipped switch.
After checking your control panel, you can also inspect the continuity in your wires. If the wires have proper readings, it means that everything with your power source is fine.
3. Get it Checked by a professional
If you are not familiar with the inspection and it is difficult for you to do that, it is wise to get a professional for the job. Let him handle the issue after explaining to him the problem with the wall switch. The rest of the job will be done by him by going through every possible part to find out what is causing the problem.
Similarly, when he will be able to crack it, he will perform the repairs as per requirement.
4. Contact Customer Support
On the other hand, you can also try to contact customer support. While contacting the team, whatever the medium is, it is highly recommended to share all the details you know about the problem you are getting and the steps you have already taken.
The support team will be able to solve your issue or give you recommendations or advice on what you need to do.
You have to be as cooperative as possible when a technician from the team is handling your problem.
5. Faulty Switch
If you have done almost everything but are still unable to solve the problem, it may be due to the faulty switch. In this case, you need to get a complete replacement for it.
Unluckily, you need to spend some extra bucks to get a brand-new switch for your Hunter ceiling fan.
So, before you purchase a new one, it is better to make sure that you have tried all the troubleshooting steps in the guide we have mentioned.
In addition, you need to ensure that you get a wall switch that is completely compatible with your ceiling fan.
Is your Wall switch not working with your Hunter ceiling fan? most of the time, the main culprit behind this issue is the loose wire. To determine it, you will have to go through the wiring that you have installed and find out what is not working. However, if you are not able to locate the problem with the wire, you should do the switch troubleshooting.
If you want to know how to do it, make sure you read the details that we have discussed in this article above.